- Abby Franquemont
- 10 Comments So far
You mentioned that you usually keep track of the length of fiber spun. I was wondering how you calculate that?
I usually keep a notebook handy and log my spinning in various ways, and I measure and write down several things about the yarn, then tag the yarn with what I guess you could call its associated metadata.
I like to keep track of how long it takes to spin and ply the yarn to some general degree, though sometimes it’ll be no more detail than “an evening watching TV.” If there’s anything particularly unusual about the fiber or the technique, I also jot that down. I also generally try to keep track of what the fiber was in case I want or need more, and so I can tell people if they ask. So my little notebook next to my spinning will have things in it like:
7 Feb 2007
Chasing Rainbows Merino/Tencel – African Savannah 2 oz
Split space-dyed top down center, 1st half /1 bobbin, 2nd half / next bobbin
8 Feb 2007
remaining CR merino/tencel on bobbin 2, 1.5 hrs
plied same, 2 hrs
Once the yarn is done, I take the bobbin and go skein the yarn, using my trusty counting skeiner, a Fricke freestanding floor skeiner with inbuilt counter (Fricke’s Winding Items). Mine is several years old now, and it’s been through a lot with me. The first thousand miles or so of yarn we skeined loosened the base a little and so now it has attractive Gorilla Glue detailing there. One arm of the skeiner was broken during the cross-country move last year, and reglued and secured further with wire. And the original counter gave up the ghost last fall, and had to be replaced! Now you might be thinking, “Wow, what a lemon,” but that couldn’t be further from the truth. You have to think about just how much yarn I skein. There are many days where I skein several miles of yarn. The thing has taken quite a beating, and it keeps going.
Anyway, thanks to the magic of the counter, I know how many yards there are immediately. In some cases, I choose to stop at a certain point and tie off the skein, removing it — if I’m putting things up in 100-yard or 200-yard skeins for a specific reason, like for sale, for instance. In other cases, I just keep going until the whole bobbin is empty. Then I add in the yardage — usually rounding down to the next 5, so if there are 178 yards, I call it 175 — in my little notebook, and take the skein(s) to be washed.
Once they’re completely dry, I weigh them in grams and ounces, and add that to the notebook as well. Usually, I calculate the yards per pound (ypp) at this point as well. And supposing I’m not being lazy, this is when I measure wpi, by wrapping the yarn around a ruler.
When all is said and done, I have the following metadata available to me about the yarn:
- 660 yards / 600 meters
- 2 ounces / 56 grams
- 38 wpi
- 5280 ypp
- Spinning Time: 7 hrs
- Material: Merino/Tencel handpainted top from Chasing Rainbows, African Savannah
That lets me describe the yarn in post like this one, and keep a record of it with the post as well, including photos. If it’s yarn that I plan to sell, I can determine my cost to produce it and establish pricing, and I retain the ability to reproduce the yarn at a later date without having to keep the yarn itself to crib from. What’s more, this lets me get a sense of how long it takes me in general to produce certain kinds of things, and discuss the minutiae with other people who can’t see or handle the yarn.
I don’t always measure angle of twist or twists per inch, but sometimes I do; usually if I have a picture it’s apparent to me what the twist is like in the yarn. Similarly, sometimes I write down minutiae about prep and spinning technique, but sometimes it’s obvious to me and I don’t.
What I should do is actually produce sample cards with samples of the yarn and all this information on them! That would be truly principled and orderly… but instead, mostly I use digital photos, my photo gallery, and my blog, to track things.
If you don’t have a counting skeiner, a simple, quick-and-dirty way to figure your yardage is to skein the yarn, wash it and dry it, and then stretch the skein out next to a yardstick and see about how long it is. This won’t be perfectly accurate, but you’ll be close! Suppose it’s 24 inches long; one loop of that skein is therefore 48 inches of yarn. Now, count the loops (I like to count ’em in pairs to make it go faster, or in threes). If you have (for example) 37 loops, then 37 x 48 = 1776 inches, and 1776 inches divided by 36 inches in a yard comes to 49.3 yards. I would round that down to 45 yards; I would always rather have underestimated the yardage I’ve got than overestimated it! I would rather be surprised by leftovers than a shortage.
I always recommend weighing your yarn after finishing, and once it’s well dry; personally, on a long skein of yarn, I always lose a couple of grams of weight in the wash, that are actually oils from my fingers when I spin, little bits of dirt, and so forth. Similarly, you want to measure your wpi after finishing, as yarn will generally change a bit in the wash. In fact, ideally I would reskein my yarn after washing it, and sometimes I do — definitely if I’m going to enter it in a competition, in which case I skein it meticulously for that purpose.
I think that’s about it for what I usually track about a given yarn, and how. To sum up, I have a little spiral-bound notebook in which I record the key things, and then I transfer that to my photo gallery notes and/or my blog when I write up the yarn, as well as to a tag on the skein (even if I don’t write up the yarn and take pictures). Why do I do all of this? Because it’s a matter of seconds here and there while doing the work, but long and annoying steps to have to take later if I don’t track it when I have the chance to do it easily! It saves me from having a skein of random yarn in my stash that I’d like to do something with, but I’ve got no clue how many yards there were, or where I got the fiber if I want to do more, and that sort of thing.