Abby’s Spinning Gift Guide 2014
Do you have a spinner in your life for whom you’d like to buy a gift, but you aren’t sure what he or she would like? I’ve pulled together a list of some favourite items in various price ranges to help, followed by a few tips on shopping for spinners in secret.
The Spinner’s Party Tool from FBN Plastics. Featuring a wraps per inch gauge, angle of twist gauge, and a bottle opener with a keychain ring, this little gadget is incredibly handy. I have several, in various places around the house, my car, and my luggage. Did I mention it’s TSA approved, so I can always measure my yarn AND open my beer, even when I’m on the road? I also keep one hanging from my wheel next to my orifice hook, and one in my spindle bag. $5.
Spinning Wheel Oil Bottle. If you’ve got a wheel, you need oil for it (typical motor oil works great), and you’d rather have it be easy to apply. I really like these Schacht oil bottles because of the long needle tip that lets you get the oil right where you want it. $8-9
Orifice Hooks. These are used pretty constantly with most spinning wheels, and most spinners could stand to have more of these. Sometimes the ones you have go rogue, and there you are, bending a paper clip to handle an emergency — if you don’t have a few extras lying around. Some spinners really like to have beautiful ones. They can be made from wood, glass, all manner of things. $2 and up, with a lot in the $10-20 range.
A Pretty Diz. Used to pull prepared fibers into their final pre-spinning state, dizzes are more of a hit-or-miss gift, but they’re usually inexpensive and fun. Many people make them or repurpose household objects like buttons, but you can also find really pretty ones. If your spinner has a drum carder or combs, this could be a win for a small gift. Prettier, fancier ones cost a bit more. You want smooth (so fibers don’t snag) and durable (because fibers are stronger than you might think). Around $20.
Fiber! Dude, there is so much fiber in this price range. Omigod, is there fiber in this price range. Sadly, it’s hard to say there’s one kind of fiber that makes the perfect gift. So instead, here’s a short list of a few of the folks whose fiber I personally always find delightful, and whose stuff I use in classes.
A Nice Spindle. At this price point, you can buy some really nice spindles! Some of my favourites are:
– KCL Woods
I have never had a spindle I didn’t really, really like (or more likely, desperately adore) from any of these makers. They’re all unique and individual and worth every penny as workhorse tools that are also beautiful. Even if your spinner doesn’t have a major spindle attraction, these are the spindles that, shall we say, I doubt anybody would kick out of bed for eating crackers.
Hand cards — if your spinner has none, then my choices for all-around hand cards are Schacht curved medium or fine, or Strauch fine, including half-size. Every individual spinner will develop his or her own preferences, so the curved or flat question is pretty much unanswerable. Your spinner won’t know until he or she has used them for a while. So don’t overthink it! If you’ve got a spinner who does not have hand cards, it’s time to remedy that. If your spinner does have hand cards, but only one set, see if you can figure out which set and then call a good fiber shop (like one of the ones linked in various places in this article) and ask for advice on what cards should come next.
Books and Videos! There are so many great resources out there now, many of them free — but I still recommend having an extensive library. The hot new release The Spinner’s Book of Fleece by Beth Smith (you can even get a signed copy). If your spinner doesn’t already have it, he or she probably wants it. Here’s a short list of some other books I recommend:
- Start Spinning by Maggie Casey
- The Intentional Spinner by Judith MacKenzie
- Spin Control by Amy King
- Fleece and Fiber Sourcebook by Deb Robson and Carol Ekarius
- Big Book of Handspinning by Alden Amos
- Spinner’s Book of Yarn Designs by Sarah Anderson
- Spin to Weave by Sara Lamb
- Respect the Spindle by, uh, me, Abby Franquemont
- Spinning for Softness and Speed by Paula Simmons
- Color In Spinning by Deb Menz
Classes! Nothing helps a spinner get more out of whatever they’ve already got than taking some classes. However, sometimes they can be hard to justify for people, and so they make really great gifts. Contact your local (or most local) fiber shop or weaver’s guild to find out what options exist in your area.
Yarn Handling Tools — often overlooked, these tools actually make an enormous difference in the life of a spinner. Eventually, every spinner probably should have a way to make skeins of yarn, a way to hold those skeins to wind them into balls, and a way to easily wind those balls. So, that’s a skein winder or niddy noddy (for making skeins), a swift (for holding skeins), and a ball winder (for, um, winding balls). YES, there exist tools out there that do double duty, but I’m going to tell you the truth: almost none of them do a truly great job, and in the long run, your spinner will probably be happier with great tools that really work reliably for the purposes for which they were made. So here are my faves:
– Schacht Niddy Noddy. Like real antique ones, this niddy noddy is extremely lightweight, making it easy to work with when winding skeins. Unlike antique ones, this collapses and folds up small, and can make more than one size skein. $75.
– Fricke skeinwinder. I have both a motorized, and non-motorized, version of this winder, equipped with a rotation counter that tracks your revolutions so you know how long your skein is once you’re done winding. These are probably the biggest time savers of any single piece of equipment I own — no exaggeration.
– Swift! The umbrella style is terrific and sturdy and usually repairable, unless you get a really chintzy one (they’re out there — if the swift is half the price of most of the others, I would probably give it a pass). You want one that says it can handle 2-yard skeins. You can get them that clamp to a table or surface, that rest on a surface, or that stand on the floor. I have one free-standing and one clamping, because different circumstances call for different things. I’ve been very happy with the decades of hard work I’ve gotten from my Ashford swift and my Glimakra swift. But counter to what I said above regarding multi-tasking tools, I have only had great experiences with the Strauch skeinwinder, so that makes the list as well. One of the things that’s great about the Strauch ones is that you can get table clamps that work even with those newfangled plastic folding tables that have a lip on them — a perpetual irritation for the fiber artist who wants to clamp stuff to stuff!
– Ball Winder. I grew up with plastic ball winders that were pretty great, but sometime this century or so I guess the quality really diminished. I think it was 2004 when I went through 3 ball winders in 3 months, and swore off buying the cheap ones, having concluded that for the price of the three cheap ones with broken plastic gears I could have bought one really good one instead. As it happens, I still have that one really good one, which was a Strauch that I initially expected to be overkill for my needs. Turns out it hasn’t been. The other really fabulous one out there is from Nancy’s Knit Knacks — when Nancy says heavy duty, she means it.
– Bobbin Winder. My Schacht bobbin winder is my most reliable and dependable. After the skein winder, the bobbin winder is probably my biggest saver of time and money. With it, and an assortment of cheap plastic bobbins, it simply doesn’t matter how many bobbins I have for which spinning wheel.
– Combs! Oh, man, where to start with combs? If your spinner has none, then I’d go with either the double-pitch Valkyrie fine hand combs, or St. Blaise combs (designed by master comber and spinning teacher Robin Russo, and made by her husband Pat). These two are actually the ones I use the most, as generalist combs. However, your spinner may have specific wants and needs and if he or she has combs already, there could be another set that are needed in order to perform specific tasks, in which case, refer to the upcoming advice about sneakily finding out what your spinner really wants.
– Blending Board. These have been the hot item in fiber prep for the past year or two, and there are lots of designs. I really like the Clemes and Clemes one and the Ashford one, which can sit on your lap but also feature a keel that you can hold between your knees to keep things steady while you play, or set on a table in front of you.
This is a tough price range — it represents a price point where you can often find more expensive equipment used in good condition, and where you start to see the most entry-priced higher-end tools and equipment. However, most of the new equipment in this price range doesn’t wow me in terms of fit and finish, durability, and bang for the buck. If this is your budget, I’d put together a bunch of mix and match stuff from lower price ranges, such as a skein winder, swift, ball winder, and bobbin winder. Or a spindle and a lot of fiber. Or lots of extra bobbins for your spinner’s wheel of choice. Or, see if you can get your spinner to divulge a wish for an add-on to his or her wheel, because you can also find a lot of things like that in this price range.
Another good option might be to pick up your spinner a way to use up some of that yarn, and a great option in this price range is a rigid heddle loom with accessories. I’m partial to my Schacht rigid heddle looms because they’re laid out similarly to floor looms, and because of the range of accessories available (one of my faves is the heddle solution that lets you mix and match so you can do a lot of varied things with your warp). One of the great things about giving a spinner a rigid heddle loom is that it’s going to eat up lots of yarn, and it’s easy to mix and match and combine small skeins and leftovers into cohesive finished projects. I realize it’s a whole new slippery slope, but… you never know, you might just want to give your spinner a gentle nudge. You’ll doubtless be repaid in all kinds of new textile goods.
Now we’re in the entry priced spinning wheel price range! You might want to take a stroll through my article on choosing your first wheel to help you think this one through. The brands I most recommend are Ashford, Lendrum, Louet, Majacraft, and Schacht. My two top picks for wheels in this price range are the Schacht Ladybug and the Lendrum folding wheel, but all the brands I mentioned are dependable, excellent performers, and well-supported. I recommend finding the closest dealer you can for these, so you can get local help and support for the new wheel.
This is also the right price range for a drum carder. Myself personally, I have three — a Strauch, a Pat Green, and a Louet Classic. They all do different things, and it’s really no coincidence that these are the three I have: these are the ones that I’ve kept after working with lots of others. The Strauch is my best all-around, the Pat Green is the best for superfine fibers, and the Louet Classic is the best for more medium and wild and crazy fibers. Find whatever’s in your price range from one of those brands, and you pretty much can’t go wrong. If I could only keep one of these carders, though, it would be the Strauch, based on over a decade of extensive drum carding experience. My top pick for an entry-priced drum carder is the Strauch Petite, based on almost a decade of working with them in classes.
As another thought for this price range, sending (or taking) your favourite spinner to a class (these can be pretty cheap and local, or they can be pricier with national instructors and involve travel), retreat, or fiber festival would be the kind of gift they’ll talk about for years.
At this price point you can either buy a heavier duty drum carder, a higher-end spinning wheel, or put together a spinner’s studio package. My top picks for spinning wheels in this price range are: Schacht Matchless, Majacraft Rose and Suzie, Louet Julia, Ashford Elizabeth, Lendrum Complete package. My top picks for drum carders are Strauch Finest and Pat Green Blender/Carder.
For a package that will give your spinner pretty much everything he or she really needs, here’s what I’d do. This list is ordered by priority, based on my experience.
– spinning wheel
– skein winder or niddy noddy (go for the skeinwinder if budget allows)
– books and videos
– bobbin winder
– hand cards
$1200 and up
Okay, I’m going to talk turkey here: if you’ve got this kind of budget for gifts for the spinner in your life, you probably shouldn’t be taking the word of some stranger on the Internet, even if it’s me. Chances are good that your spinner already has a wish list of things he or she really, really wants, and you’re going to have to get that information somehow.
There’s always coming right out and asking, but if you wanted to be less direct (so you can definitely surprise someone), you might consider contacting the fiber or yarn shop that he or she frequents, and asking if they know your spinner and whether or not there’s anything the folks at the shop think he or she wants or needs. That’s also a way to find out what’s new, what’s hot, and that sort of thing. Your spinner also might be a member of public fiber arts groups online, and while I wouldn’t ordinarily suggest stalking someone on the internet, you might well find that a public forum contains posts where your spinner has outright stated what he or she most wishes they had. It’s been known to happen. Lastly, it’s possibly slower to get answers, but watch your spinner doing what he or she does and see if anything seems slow, cumbersome, or awkward. Then ask if there’s something that solves that. For example, “Hey, that niddy noddy thing seems kinda slow. Is there a faster way?” You’ll probably hear “Oh, yeah, there are skein winders, but they’re $100 and up and I can’t warrant spending that.” And then you’ve broken the ice! Then you can simply say things like “Wow, I had no idea there were so many things like that! Tell me more about some other interesting ones!” and there you go, you’ll probably hear more than you ever imagined.
Believe it or not, I get asked this question pretty regularly: “If you were going to set someone up with a really awesome spinning studio for the best bang for the buck, what would you get?” As with all things spinning, the answer is really “It depends,” but if this were some sort of game show which I’d win by just handling that question, I’d budget $1500-1700 and go this route:
- Lendrum DT Complete – $790 OR Schacht Ladybug – $650
- Fricke Skeinwinder – $142
- Ashford Umbrella Swift – $145
- Strauch ball winder – $170
- Schacht curved hand cards – $85
- Valkyrie fine double pitch combs – $95
- Start Spinning by Maggie Casey, book and DVD (about $40) if it’s a brand new spinner
- 5 pounds of assorted fibers – up to $200
That pretty much does it for this by-price-point gift guide! Please leave your comments and let us know if you have suggestions I’ve missed.